Steripur 407

คุณสมบัติสินค้า:

DN 65 - 100 mm (2 1/2" - 4")

Share

แบรนด์ : SAMSON SED

Share

Features

- High cycle stainless steel piston actuator
- Compact design, the outside diameter of the actuator is the same size as the bonnet flange
- Advantages in multiport bodies and manifold valve assemblies
- Control air connection in flow direction
- CDSA sealing concept, see page 32
- Flexible diaphragm suspension
- Encapsulated diaphragm
- Clean and polished exterior design ideal for sterile wash downs

Optional

- Control air connection 90° to flow direction
- Autoclavable

Technical Data

Control function (Cf.):

Pneumatically operated
Fail safe close (NC): Cf. 1 & 4
Fail safe open (NO): Cf. 2 & 5
Double acting (DA): Cf. 3 & 6
At control function NO/DA higher control pressure than required may affect
the lifetime of the working diaphragm.

Direction Control connection:At Cf. 4, 5 & 6, in flow direction, standard
At Cf. 1, 2 & 3, 90° to flow direction

Max. working pressure:

Unidirectional (delta p = 100%)

Higher working pressure may be achieved with different actuator.
Please consult a SED factory representative for working pressure
above the indicated maximum.

Max. working temperature:160°C (320°F) dependent on application

Control pressure:

Cf. 1 & 4 DN 65-80 5 - 8 bar(72-115 psi)
Cf. 1 & 4 DN 100 6 - 8 bar(87-115 psi)
Cf. 2, 3, 5 & 6 DN 65-80 4,5-6 bar(65-87 psi)
Cf. 2, 3, 5 & 6 DN 100 5,5-7 bar(80-100 psi)

Diaphragm material:EPDM or PTFE
Valve body material:Forged 1.4435/ 316 L ASME/BPE
Investment cast 1.4435/ 316 L
Other alloys
End connection:Butt weld ends see fold out page 21
Clamps and flanges see page 22 to 24
Special ends
Actuators suitable for:Two-Way bodies, Welded configurations,
T-bodies, Multiport bodies,
Tank bottom bodies
Flow rate:Kv in m3/h (Cv in GPM) 

สินค้าเกี่ยวข้อง

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ นโยบายคุ้มครองข้อมูลส่วนบุคคลและคุกกี้