หมวดหมู่ : PUMP , YAMADA NDP ,
แบรนด์ : YAMADA NDP
Share
DP-10 series Specifications
| Body Material | A: Aluminum (ADC12) | S: Stainless Steel (SCS14) | P: GF Polypropylene (PP-GF) | ||
| Diaphragm Material | |||||
| C: Neoprene (CR) | DP-10BAC(851743) | DP-10BSC(851746) | DP-10BPC(851745) | ||
| N: Buna N (NBR) | DP-10BAN(851742) | DP-10BSN(851747) | DP-10BPN(852280) | ||
| T:PTFE (TPEE) | DP-10BAT(851725) | DP-10BST(851741) | DP-10BPT(851744) | ||
| H: Hytrel(R) (TPEE) | DP-10BAH(851750) | DP-10BSH(851751) | DP-10BPH(851752) | ||
| S: Santoprene(R) (TPO) | DP-10BAS(852674) | DP-10BSS(852675) | DP-10BPS(852676) | ||
| H/T: Hytrel(R) (TPEE) | DP-10BAH/T(851872) | DP-10BSH/T(851873) | DP-10BPH/T(851874) | ||
| Wetted Parts Material | |||||
| Ball Valve | DP-10B〇H/T: PTFE Others: Same as the diaphragm material | ||||
| Valve Seat | A5056 | SUS316 | DP-10BPC: CR DP-10BPN: NBR Others: PP-GF | ||
| Valve Stopper | PA *1 | SCS14 | PP-GF | ||
| Center Disk | A5056 | SUS316 | PP SUS304(Insert material) | ||
| Specifications | |||||
| Nominal Diameter | 3/8"(10 mm)Material Connection | ||||
| Material Connection | Suction Port | Rc 3/8 | |||
| Discharge Port | Rc 3/8 | ||||
| Air Connection | Supply Port | Rc 1/4 (W/air valve) | |||
| Exhaust Port | Rc 3/8 (W/silencer) | ||||
| Air Supply Pressure | 0.2～0.7 Mpa*2 | ||||
| Maximum Discharge Pressure | 0.7 MPa | ||||
| Water Discharge/Cycle | 50 mL *3 | ||||
| Maximum Flow Rate | 20 L/min *4 | 17 L/min *4 | |||
| Maximum Air Consumption | 300 L/min（ANR） | 250 L/min（ANR） | |||
| Maximum Size Solid | 1 mm以下 | ||||
| Suction Head Lift | 1m | ||||
| Net Weight | 3.5 kg | 5.2 kg | 3.0 kg | ||
*1 DP-10BA uses nylon (PA) as the material for the valve stopper. Note the corrosion resistance. Not suitable for MEK, etc.
*2 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*3 The water discharge is provided as a rough approximation only. The discharge will differ depending on factors such as the liquid to be transferred and the piping conditions.
*4 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.
