EGM6300C

คุณสมบัติสินค้า:

แบรนด์ : TOKYO KEISO

Share

Features
  • Stainless steel SS304 housing for the primary head is hygienic and aseptic.
  • High quality and colorless PFA liner for wet parts complies with FDA requirements.
    • Reinforced with embedded stainless steel grid, the PFA liner on the inner surface of the measuring tube has the creep
    • resistance against heat stress caused by fluids and also deformation by vacuum pressure.
  • Effective CIP and SIP cleaning without any moving parts and flow hindrance inside the measuring tube.
  • Easy mounting and dismounting from piping with ISO clamp connection as a standardized practice.
  • High accuracy of ± 0.5% of reading
  • High speed data processing for quick response. Suitable for batch process control and pulsation flow.
  • Certified by EHEDG and 3A

 

Short Specifications

Measuring objectLiquid (Conductivity: To be 1μS/cm or more(To be 20 μS/cm or more for water))
ExcitationSquare wave
Fluid temp.-40 to +120°C
Note: When cleaning the flowmeter with steam, use steam with lower temperature than 140°C for less than 30 minutes.
Fluid press.-0.098 to +0.98 Mpa
Flow rangeMax. 0 to 339 m³ /h
Min. 0 to 0.53 m³ /h
Flow velocity rangeMax. 0 to 12 m/s
Min. 0 to 0.3 m/s
Nominal size25, 40, 50, 65, 80, 100 mm
Process connectionISO 2852 Clamp
Wetted part material
Liner: 
PFA
Electrode: 
Hastelloy®C4 [Standard] [Option] Stainless steel SS316L, Titanium
Process adapter: 
Stainless steel SS316L
Gaskets for process adapter: 
Silicone rubber
Housing materialPrimary head housing: Stainless steel SS304
Converter housing: Aluminum alloy Anti-corrosive painting
PaintingPolyurethane resin painting
Measuring accuracy
Indication and pulse output: 
For velocity ≧ 0.33m/s: ± 0.5% of reading
For velocity < 0.33m/s: ± 0.2% of reading + velocity error of ± 0.001m/s
Current output: 
Additional error of ± 0.01mA be added onto display and pulse output.
IndicationBlue, dot matrix LCD (With backlight)
The touch sensor system by infrared sensor 3-page composition, Indication change of one to three lines is possible for the 1 or 2nd page by data setup.

Contents of indication: 
Flow rate, velocity, total flow, conductivity, coiltemperature, self-diagnosis result, and setting menu etc.
OutputCurrent output: 4 to 20mA DC
Pulse output: Open collector output
Standard functionsCustomer's free measuring unit setting function, Automatic zero adjustment function
Bi-directional flow measurement function, Double range measurement function
Excitation current frequency switching function, Self diagnosis function, Memory save function for power failure, Testing function, HART® communication
Power supply100 to 230 V AC (85 to 253 V AC)
24 V DC (9 to 31 V)
Explosion proofIP66/67(IEC 60529)


สินค้าเกี่ยวข้อง

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้