GST

คุณสมบัติสินค้า:

Share

แบรนด์ : TOKYO KEISO

Share

Features

  • Clamp-On
    • Flow rate can be measured just by sandwiching the existing tube.
      Essentially clean because it does not contact the piping.
  • Energy saving and space saving
    • Simultaneous measurement of up to 6 lines with one SFC011GS.
      Multiple units can be connected to each other (No need for crossover wiring).
  • High-speed operation
    • 30 ms arithmetic processing.
  • Zero adjustment
    • By performing zero adjustment before measurement, it can be started under the optimum conditions for the fluid to be measured.
  • Abundant functions
    • 7Seg LED (red, 4 digits) indicates instantaneous flow rate and status.
    • Various analog outputs of instantaneous flow rate (select according to output types).
    • Frequency output (1 kHz F.S.), error output, instantaneous flow rate upper/lower limit alarm,
        integrated flow rate output,and integrated flow rate upper limit alarm (open collector).
    • Parameter settings and flow rate data acquisition are available via RS-485 communication.
    • RS-485 communication converter (sold separately) is required.
  • Conformity standards
    • EMC conformity standards: CISPR11:2009+A1:2010 Group1 ClassA, EN61326-2-3:2013
    • RoHS2 compliance

 

Short Specifications

Detector

ModelGST
FluidPurified water, photoresist, low-K material, thinner, etc.
(fluid that does not contain bubbles)
Flow rangeMax. 0 to 2.0 L/min
Min. 0 to 0.5 L/min
Accuracy±2% of R.D.
Flow rate: 
±0.016 L/min for
0.8 L/min or less
TemperatureNormal temperature (±0.5℃)
Tube sizePFA 1/8”, PFA 1/4”,
PFA φ4, PFA φ5, PFA φ6
MaterialPPS (clamp band for large diameter: PP)
ConstructionEquivalent to IP20 (indoor use)

 

 

Converter

ModelSFC011GS
Channel6
Display4 digits (Instantaneous flow rate, status)
Output
Digital output: 
NPN Open collector
Load rating : 30 V, 10 mA DC
Frequency output, Error output,
Instantaneous flow rate upper/lower limit alarm,
Integrated flow rate output,
Integrated flow rate upper limit alarm
Analog output: 
4 to 20 mA DC (Standard) Load resistance: 250Ω or less
Power supply24 V DC ±10%
ConstructionEquivalent to IP20 (indoor use)
InstallationDIN rail mounting

 

สินค้าเกี่ยวข้อง

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ นโยบายความเป็นส่วนตัวและคุกกี้