Corporation Stops with Injection Quills

Corporation Stops with Injection Quills AVAILABLE WITH BRASS OR 316SS VALVES 

• FEATURES AND BENEFITS
  •  Lever-operated stop eliminates the need for a wrench
  •  Protection chain prevents withdrawal before Corporation Stop is closed
  •  1/2" female inlet connection on all models

• RECOMMENDATIONS
  •  Install a check valve and isolation valve at inlet of quill for ease of maintenance.

*AWWA process connection available. Add “-AWWA” to end of model no. 
†Special lengths are available up to 24" (610 mm) for CPVC & PVDF; up to
36" (914 mm) for 316SS & C-20. Add “-SP” to end of model no.

High-Pressure Injection Quills AVAILABLE WITH OR WITHOUT CHECK VALVES 

•  FEATURES AND BENEFITS
  •  Available with spring-loaded check valve (QC) or no spring-loaded check valve (QB) options
    
• RECOMMENDATIONS
  • For lines smaller than 4" diameter, trim quill so chemical is released near center of line. Use as-is for lines over 4" diameter.
  • Install with “Telltale” V-notch facing upstream so flow strikes angled face at end of quill for most rapid dispersal of injected chemical.
  • For maintenance ease, installation of an isolation valve, rated above line operating pressure, immediately behind the quill is recommended.

         *Has slotted end †Special lengths are available up to 24" (610 mm). Add “-SP” to end of model no.

    Read More